WEIMA E.300 drainage press for cans and more

To make getting started as easy as possible, all E Series presses are delivered pre-configured and ready for use as a plug-and-play solution. All that is required for installation is a power and water connection. On request, we also offer machine setup and commissioning (including training) via digital channels.

Designed for highly flexible use within your business, the compact E Series presses can be moved to the required location on braked castors and put into operation immediately. They can also be used temporarily outdoors, as the machine is built to the IP 65 standard.

Thanks to level sensors in the feed hopper, the press can be operated automatically. The machine switches on automatically when a certain level is reached in the hopper. To prevent wear and tear on machine components, the machine automatically switches to standby mode as soon as the level falls below a certain threshold.

To compensate for temperature variations in the hydraulic oil, E Series machines are equipped with a water-cooled oil cooling system using a heat exchanger. This ensures long periods of operation without breakdowns. The heat exchanger is housed within the hydraulic housing, thereby protecting it from contamination.

The inclined discharge chute allows the moulded parts to be discharged at a higher level – directly into a large container or a tipping trough. This eliminates the need for a conveyor belt. Depending on your requirements, the discharge chute can be configured to be straight, or to discharge to the left or right.

Thanks to their lockable castors, the E Series machines can be used flexibly in the workplace. This ensures optimal access to the machine, even during cleaning and maintenance. A maintenance and cleaning hatch on the hopper facilitates access to the interior of the machine.

The key components of the hydraulic unit have been generously dimensioned to ensure that a reserve capacity is always available, even under full load. Among other things, this results in lower heat generation and makes the machine significantly less susceptible to contaminants.

We focus on durability. These WEIMA machines are made from high-quality stainless steel. This makes them not only particularly robust, but also low-maintenance and hygienic.

The extracted liquids are collected in the drip tray fitted beneath the press. Depending on how the machine is positioned, these liquids either drain directly into a drain from there or can be diverted via a hose using the milk pipe connector.

The curved filling funnel prevents cans or other materials from being forced out of the machine by the immense pressure during the pressing process. Furthermore, the curved shape makes cleaning easier and prevents squeezed-out liquid from spurting uncontrollably out of the filling opening.

Parameters (e.g. pressing time, pressing force) can be quickly adjusted via the colour display of the built-in PLC control system. The hold-down function can also be set easily via the PLC control system. This programmable hold-down time is particularly necessary for pressing absorbent materials. This is the only way to produce moulded parts that retain their shape permanently.